Sprint 210 three-phase meter provides flexibility through a modular design that readily accommodates the latest communications technologies utilising DLMS open protocol. The communications module can be factory installed, or fitted (or replaced) in the field. This enhances flexibility by enabling the use of ‘best of breed’ technologies, thereby future-proofing the utility’s investment.

Sprint 210 paves the way for easy and convenient data transfer from the meter to the utility’s back office and is the perfect solution for AMI applications. Provision for a range of communications technologies, including mesh radio, GPRS/3G devices and others, ensures that Sprint 210 will meet your current and future needs.



    • Domestic-three phase metering
    • Small and medium commercial premises
    • Advanced metering infrastructure (AMI) and non-AMI
    • Suitable for co-generation metering applications
  • Key Feature

    • Four-quadrant metering with import/export registration
    • Multiple configurations function: up to 16 pre-loaded in the meter and executed in the field (variant specific)
    • Support for AMI features: TOU based switching, boost, and remote firmware upgrades
    • Large capacity power supply to support high communications device demands
    • Modular communications ‘front belly’ design with support for a range of communication devices
    • Remote de-energisation and energisation (direct and arm)
    • Logging and remote notification (alarm) of events
    • QoS (Quality of Supply) monitoring
    • User-friendly tariff configurability features
    • Enhanced load profile capability, with primary load profile for energy data and secondary load profile for supply quality
  • Benefits

    • Modular communication for easy integration with AMI system
    • Reduced on-site call times and cost
    • Assists consumers in managing energy consumption
    • Front-mounted communications module for easy access 
    • Specification
    • Electrical

      Connection type

      3-phase, 4-wire, active neutral, direct connected

      Load terminals

      Variant specific, (internal 31.5 A load control, 2 A load control)

      Rated voltage (Vnom)

      230 V AC, -20% to +15%

      Maximum voltage

      300 V (L-N) continuous

      Impulse withstand

      12 kV, 9 J, as per NMI M6


      50 Hz ±5%

      Current range

      10 A Ib, 100 A Imax


      Class 1.0 (Active Energy), Class 2.0 (Reactive Energy)

      Metrology Lamp

      Two configurable metrological LEDs for active and reactive energy



      AS 62052.11, AS 62052.21, AS 62053.21, AS 62053.23, NMI-M6

      IEC 62052.11, IEC 62052.21, IEC 62053.21, IEC 62053.23

      Data storage capacity

      Energy/demand load profile

      1680 days (single channel) at 30-minute interval (configurable )

      Configurable energy channels

      Up to 8

      Quality of Supply (QoS) parameters

      3000 days (single parameter) at 30-minute interval (configurable) parameters include average voltage, current, THD, temperature etc.


      Mains supply contactor

      100 A

      Auxiliary load control

      31.5 A and/or 2 A (build option)


      Dimensions (W x H x D)

      180 mm x 252 mm x 118 mm (with 35 mm terminal block cover)


      Flame-retardant polycarbonate


      Terminal cover, meter main cover, configuration button, communications module


      2.4 kg (approx.)



      ANSI optical port (AS 62056.21)


      LAN, HAN, WAN. Support for most communications topologies

      Hot-swappable interchangeable modules, sealable separately

      Pulse Output (option)

      230 V AC, 2 A (volt free)

      27 V DC, 27 mA (build option for up to 2 outputs)

      Outage notification

      Last gasp power supply (build option)


      Ingress protection

      IP 53

      Insulation class

      Protective class II


      Operating: -10 °C to +60 °C

      Storage: -25 °C to +70 °C


      95%, non-condensing