Choose another country or region to see content specific to your location.

Product at a glance

Mains operated electronic room thermostat

Mains powered electronic unit, with load compensation for new and replacement installations. Temperature setting range 5-30 °C. This is part of a range of purpose designed room thermostats, offering the latest energy saving control technology combined with established Secure design and manufacturing expertise. This makes them suitable for use in most types of heating systems that respond to a 230V mains electrical On/Off signal. They are also perfect partners for use with our range of programmers and zone valves. Designed to look good, these thermostats will outperform many older styles of thermostat and can often produce savings in the order of 10% over and above those achieved by traditional units using older technology. Temperature control accuracy of +/- 0.5°C and different settings (for gas, oil and electric systems) will reduce the temperature swing that normally occurs with older style thermostats


  • New installations
  • Replacement of old or inefficient thermostats
  • System upgrades to add a room thermostat
  • Frost protection
  • Multi occupancy buildings
  • Control of most domestic gas or oil-powered central heating system
  • Control of additional heating zones
  • Combination (‘combi’) boilers
  • Control of solid-fuel heating system


  • Easy to install and use
  • Peace of mind that thermostat is tamper-proof
  • Benefits of weather/frost protection
  • Reduce temperature swing that normally occurs with older style thermostats
  • Increased energy savings


  • Wireless or wired (battery operated) versions
  • Load compensation
  • Boiler Plus compliant when used with a time control
  • Clear back-lit digital display
  • Set temperature displayed; actual temperature displayed if dial is pressed
  • Temperature range 5-30°C
  • Industry standard wall plate
  • Standard fixing centres
  • Standard, frost and tamper-proof versions
  • 7 years no quibbles warranty



Power supply 230V 50Hz
Contact rating 3 (1) Amps 230V AC
Contact type Micro-disconnection
Pollution degree Degree 2
Temperature accuracy +/- 0.5°C (at 21 °C with 0.5 amp load)
Temperature range 0-20°C
Case material Thermoplastic flame retardant
Dimensions 86 x 86 x 36.25mm
Rated impulse voltage Cat 2 – 2500V
Enclosure protection IP30
Design standard EN60730 – 2-9
ERP rating Class IV (2%)